Flame Safe USA
                         CALL US: 1-800-333-9197 
                   Ph: + 1-817-740 -9197
                    email: [email protected]
2650 Warfield Ave., Fort Worth, TX 76106
Fire Retardant logo
Contact Us
FLAME SAFE FIRE POLY FP75E
EXTERIOR FIRE RETARDANT FOR ALL SPECIES EXTERIOR WOOD, PLYWOOD ● LUMBER ● TIMBER
FP75-E a/k/a Flame Safe X-T is a clear matte finish exterior aqueous resin fire retardant coating specifically formulated for exterior wood . Test conducted at Southwest Research Institute based on UL1256 (ASTM E84, ASTM E2768, ASTM D2898 5 year Standard Test Method) indicates Flame Spread rating 5 Smoke Index 115 Maximum Flame Front 10.4. Test at Intertek Laboratories indicates Flame Spread 0, Smoke Index 120, Maximum Flame Front 5.8.Test at Csiro Testing, Australia AS/NZS 3837 showed no residual flame after 2 minutes, Reduced Fire Hazard per National Construction Code (NCC). Fire Poly 75E coverage rate is 166-200 sq. ft. per gallon. Fire Poly 75E is a sealer, primer for exterior latex paint, is stainable with aqueous based stains.​
EXTERIOR / INTERIOR FIRE RETARDANT FOR WOOD:

  All surfaces to be treated must be clean and dry. Fire Poly 75 E fire retardant coating is water-based, clear liquid that becomes insoluble when dry. Fire Poly 75 E also acts as a preservative, and water proofing agent ultra violet inhibitor, mold and mildew protector and repels insects.. If over coating is intended, Fire Poly 75 E is an excellent surface primer for use under latex paints or can be used as a finished coat overwater based stains. 
FLAME SAFE FIRE POLY FP75E is a flame retardant coating formulated for exterior use on any type of wood species such as: preservative treated Yellow pine,  Redwood, Cedar, preservative treated Douglas Fir, preservative treated Ponderosa, Reclaimed wood, Cyprus. Plywood, Teak, Barnwood, Mahoghany, Hardwoods, Softwoods. IDEAL FOR MARINE USE, Wood Decks, Exterior siding, T1-11, Fencing,Trim, Exterior timbers and numerous other wood substrates.  
QUICK REFERENCE FOR APPLYING FIRE POLY FP 75E
APPLICATION: Treat before, during or after construction. / Be sure all surfaces are clean and dry before treating. / Apply with sprayer head held at 8 to 12 inches from surface / Apply with brush or roller. / May be necessary to wipe on hardwood surfaces. / Treat all surface areas where possible. Do not expose treated area to moisture for 24 hours. Get the weather forecast.
COVERAGE: Apply one (1) coat at the rate of 166 to 200 sq.ft. per gallon depending on substrate / 
Apply three (3) coats at 600 sq. ft. per gallon with the final coverage rate of 200 sq. ft. per gallon
fire retardant wood decking
CALL: 1-800-333-9197 for PRICING and ORDERING
DO NOT DILUTE OR MIX FIRE POLY FP75E FIRE RETARDANT COATING WITH ANY OTHER PRODUCTS

Fire Retardant FP75E
Exterior Fire Retardant Wood Decks
fire retardant free samples
FREE SAMPLE AVAILABLE UPON REQUEST       CALL US +1-817-740-9197 / 1-800-333-9197
Test for appearance, compatibility and efficacy on your designated substrate
Flame Safe Chemical Corporation is the only fire retardant coatings manufacturer designated by The Federal Emergency Management Agency (FEMA) as a partner under the Project Impact Program. The mission of Project Impact and the partnership with Flame Safe Chemical Corporation is to prevent or to mitigate the loss of lives, property and economic impact caused by fire hazard events. Experience has shown that all of Flame Safe’s products are suitable to achieve this endeavor.  
Fema partner
Fema partner
Fire Retardant logo
ORDER FACTORY DIRECT SAVE WITH DAILY DISCOUNTS 
  Call us Monday thru Friday 8 am to 5 pm CST +1-817-740-9197 or 1-800-333-9197    
Email us  [email protected]  Website www.flamesafe.co
Exterior fire retardant
Better Business Accreditation