Flame Safe USA
CALL US: 1-800-333-9197
Ph: 817-740 -9197
2653 Warfield Ave., Fort Worth, TX 76106
Fire Retardant wood, fire retardant plywood, fire retardant lumber, millworks, wood specialties, I-Joists, MDF, OSB, particle board, T-111, fire retardant timbers Dallas, Fort Worth, Austin, San Antonio, Houston, Waco, Odessa, Laredo, Brownsville, El Paso, Corpus Christi, Amarillo, Shreveport, Tulsa, Oklahoma City, North Dallas, East Dallas, Plano, Frisco, Dallas County, Tarrant County, Abilene
Call for pricing and ordering
If you have any questions regarding our Thatch Safe fire retardant or would like more information, please contact us:
INTERIOR/EXTERIOR FIRE RETARDANT
COATING or SPRAY FOR ROOF THATCHING, BAMBOO, REED, KOA, TIKI HUT THATCHING
QUICK REFERENCE FOR APPLYING THATCH SAFE
ASTM E84 Class A Flame spread 0 - Smoke developed 85
Apply one (1) coat at 200 sq. ft. or two (2) coats at 400 sq. ft per gallon with the final coverage rate of 200 sq. ft. per gallon
Thatch, Bamboo, Koa, Cyoress, Roof Thatching, Tiki Hut Thatching
On exterior thatching Thatch Safe can last three to five years, while maintaining a flame spread index of less than 25. In extreme weather conditions it may be necessary to re-coat surfaces every three to five years.
Treat before, during or after construction.
Be sure surface is clean and dry before treating.
Apply with 80 psi or greater sprayer at 8 to 12 inches from surface. Start at the top, hold sprayer at up angle to roof pitch to allow spry under thatching ends.
Apply with brush or roller.
May be necessary to wipe on hardwood surfaces
Treat all surface areas where possible
Do not expose treated area to moisture for 24 hours.
customer satisfaction is our top priority.
Total Solids - 42% pH - 2.8 - 2.9
Weight per gallon - 11.9 lbs Flash point - non-flammable
Specific gravity - 1.43 Color - creamy white / dries clear
Volatability - Non volatile Solvents - Water(Contains no petroleum or
Anti-Fungus - excellent resistance derivatives of petroleum
Linear shrinkage - none Bacterial - good resistance
Corrosive - mildly Moisture Absorption - none
Insects, rodents, aspergilli Toxic - non when dry
and other types of molds -excellent resistance Termites - good resistance